sm6250-common: wifi: Clean up WCNSS_qcom_cfg.ini

Remove parameters that no longer exist.

Change-Id: Ib6800987c57d050ea6fa621191e2d6df3fc80c97

wifi/WCNSS_qcom_cfg.ini

@@ -17,8 +17,6 @@ gDot11Mode=0
 # Each byte of MAC address is represented in Hex format as XX
 Intf0MacAddress=000AF58989FF
 Intf1MacAddress=000AF58989FE
-Intf2MacAddress=000AF58989FD
-Intf3MacAddress=000AF58989FC
 
 # UAPSD service interval for VO,VI, BE, BK traffic
 InfraUapsdVoSrvIntv=0
@@ -29,11 +27,6 @@ InfraUapsdBkSrvIntv=0
 # Flag to allow STA send AddTspec even when ACM is Off
 gAddTSWhenACMIsOff=1
 
-# Flags to filter Mcast and Bcast RX packets.
-# Value 0: No filtering, 1: Filter all Multicast.
-# 2: Filter all Broadcast. 3: Filter all Mcast abd Bcast
-McastBcastFilter=3
-
 #Flag to enable HostARPOffload feature or not
 hostArpOffload=1
 
@@ -49,12 +42,6 @@ gEnableApOBSSProt=1
 #Enable/Disable UAPSD for SoftAP
 gEnableApUapsd=1
 
-# Fixed Rate
-gFixedRate=0
-
-# Maximum Tx power
-# gTxPowerCap=30
-
 # Fragmentation Threshold
 # gFragmentationThreshold=2346
 
@@ -85,7 +72,6 @@ gNeighborScanTimerPeriod=200
 gNeighborLookupThreshold=76
 gNeighborScanChannelMinTime=20
 gNeighborScanChannelMaxTime=30
-gMaxNeighborReqTries=3
 
 # Legacy (non-ESE, non-802.11r) Fast Roaming Support
 # To enable, set FastRoamEnabled=1
@@ -106,15 +92,9 @@ gRoamIntraBand=0
 gShortGI20Mhz=1
 gShortGI40Mhz=1
 
-#Auto Shutdown  Value in seconds. A value of 0 means Auto shutoff is disabled
-gAPAutoShutOff=0
-
 #Auto Shutdown wlan : Value in Seconds. 0 means disabled. Max 1 day = 86400 sec
 gWlanAutoShutdown = 0
 
-# Not used.
-gApAutoChannelSelection=0
-
 #Preferred band (both or 2.4 only or 5 only)
 BandCapability=0
 
@@ -146,10 +126,6 @@ gChannelBondingMode5GHz=1
 gGoKeepAlivePeriod = 20
 gApKeepAlivePeriod = 20
 
-#If set will start with active scan after driver load, otherwise will start with
-#passive scan to find out the domain
-gEnableBypass11d=1
-
 #If set to 0, will not scan DFS channels
 gEnableDFSChnlScan=1
 
@@ -172,9 +148,7 @@ gSetRxChainmask1x1=1
 
 # Scan Timing Parameters
 # gPassiveMaxChannelTime=110
-# gPassiveMinChannelTime=60
 gActiveMaxChannelTime=40
-gActiveMinChannelTime=20
 
 #If set to 0, MCC is not allowed.
 gEnableMCCMode=1
@@ -213,15 +187,9 @@ gEnableTxSUBeamformer=1
 
 gEnableFastRoamInConcurrency=1
 
-#Maxium Channel time in msec
-gMaxMediumTime = 6000
-
 # 802.11K support
 gRrmEnable=1
 
-#Enable Power Save offload
-gEnablePowerSaveOffload=4
-
 #Enable firmware uart print
 gEnablefwprint=0
 
@@ -238,9 +206,6 @@ gVhtAmpduLenExponent=7
 # 0->3895 octets, 1->7991 octets, 2->11454 octets)
 gVhtMpduLen=2
 
-# Maximum number of wow filters required
-#gMaxWoWFilters=22
-
 # WOW Enable/Disable.
 # 0 - Disable both magic pattern match and pattern byte match.
 # 1 - Enable magic pattern match on all interfaces.
@@ -280,9 +245,6 @@ ssdp=0
 #Enable Memory Deep Sleep
 gEnableMemDeepSleep=1
 
-# Regulatory Setting; 0=STRICT; 1=CUSTOM
-gRegulatoryChangeCountry=1
-
 # RA filtering rate limit param, the current value would not
 # help if the lifetime in RA is less than 3*60=3min. Then
 # we need to change it, though it is uncommon.
@@ -308,18 +270,10 @@ gEnableLpassSupport=1
 # Whether userspace country code setting shld have priority
 gCountryCodePriority=1
 
-# Enable(1)/Disable(0) SIFS burst
-gEnableSifsBurst=1
-
 # Enable or Disable Multi-user MIMO
 # 1=Enable (default), 0=Disable
 gEnableMuBformee=1
 
-# Enable/Disable channel avoidance for SAP in SCC scenario
-# 0 - disable
-# 1 - enable
-gSapSccChanAvoidance=0
-
 # Inactivity time (in ms) to end TX Service Period while in IBSS power save mode
 gIbssTxSpEndInactivityTime=10